 | | PID: | AS63PBAW | | Description: | zCover Dock-in-Case Antimicrobial HealthCare Grade Silicone Case ONLY fits Ascom d63/i63/Avaya 3735/Mitel 5634 Handset (Compatible with IR Feature), Solid Color with Printed Keypad, WHITE |
|
 |
|
| |
HealthCare Grade Self-disinfecting Antimicrobial Infection Control
– the best solution for healthcare facilities under current pandemic situation
What is zCover® Antimicrobial DeCoVID™ Solution
The COVID-19 pandemic has disrupted lives all around the world. As of August 31, 2020, the total number of confirmed cases has reached 25 million. Research has found that the SARS-CoV-2 virus can be transmitted through contaminated surfaces, in addition to close contact with infected persons. It is therefore important to treat contaminated surfaces to reduce the spread of coronavirus.
zCover has developed an antimicrobial deCoVID solution based on material science to prevent the spread of infectious coronaviruses. The deCoVID solution deploys cutting edge deCoVID metal nanoparticles as antimicrobial, antiviral and antibacterial agents to suppress microbial growth. The deCoVID metal nanoparticles have exhibited virucidal effect against a broad spectrum of viruses to reduce virulence of cultured cells. The following figure illustrates the principle and process by which deCoVID metal nanoparticles bind viral surface proteins and inhibit viral multiplication.
As shown in the figure above, zClean® antimicrobial deCoVID metal nanoparticles can attach to the virus. When sufficient deCoVID metal nanoparticles are present, they can wrap around the surface of the virus. The virus is thus isolated and blocked from binding and invading human cells to reproduce and subsequently terminate at the end of the virus life cycle. zClean antimicrobial deCoVID metal nanoparticles surely reduce viral infectivity of cultured cells.
Based on the antimicrobial principle of deCoVID metal nanoparticles, zCover has developed a portfolio of effective antimicrobial products to prevent transmission of infectious viruses. One of these products is the zCover antimicrobial healthcare grade silicone, which has been commercialized with a variety of self-sterilizing antiviral protection products. This work maps a self-disinfecting solution that inactivates the receptors of coronavirus spikes against the spread of COVID-19 and other infectious diseases, contributing to the prevention of future outbreaks and the control of epidemics.
zCover antimicrobial products can effectively inhibit the growth and reproduction of bacteria, molds and mildew such as Escherichia coli, Staphylococcus aureus, pneumonia bacteria, Candida albicans, and Pseudomonas. Third-party lab tests show that zClean® antimicrobial deCoVID™ PE film reachs 99.9999997% self-disinfecting!
Unlike disinfectants, which provide a limited residual activity effect, zCover antimicrobial products continuously release deCoVID™ metal nanoparticles through their product lifecycles to reduce the microbes. zCover antimicrobial products can disinfect contaminated surfaces and protect users from contracting viruses 24 / 7 /365.
zCover HealthCare Grade Self-disinfecting Antimicrobial Silicone:
zCover HealthCare Grade Self-disinfecting Antimicrobial HealthCare Grade Silicone, integrated deCoVID™ nanoparticles that block microbial growth and are release 24 / 7 / 365
Self-disinfecting Antimicrobial Activity Test Result > 99.9%
US FDA REACH SVHC tested, certified & compliant:
ISO22196:2011
GB 4806.7
REACH SVHC 209
US FDA 177.1520
NO PVC / NO Latex / NO toxicity / NO heavy metal
Safe to clean with alcohol and germicidal wipes
Stop spreading germs & Covid-19 virus and cross-contamination
Excellent resistance to oxygen, ozone and UV (sunlight)
100% recyclable, environmental friendly
Design / Performance Level
- Provide 24 / 7 / 365 self-disinfecting infection control protection
- Frequency (THREE TIMES PER DAY) of cleaning/disinfection withstand the following cleaning solutions:
- Wipe up with CaviWipes, Sani-Cloth Super, AF3 and Plus
- Isopropyl alcohol, 70% concentration
- Pine-Sol, Lysol, and/or mild soap in water (dish washing detergent solution)
- Chlorine bleach, 3% solution: 1 part 5.25% sodium hypochlorite bleach concentrate in 30 parts water
- Stays in place without shifting and non-sticky
- Does not yellow, discolor, or lose clarity over time
- Highly tear / puncture resistant (resistant to pen tips, fingernails being used to press down on keys)
www.zcover.com |
| |
|
|
|
What's in the box:
- zCover Dock-in-Case® Antimicrobial HealthCare Grade Silicone Case ONLY fits Ascom d63/i63, Avaya 3735 & Mitel 5634 Handset (Compatible with IR Feature), Solid Color with Printed Keypad
|
| Self-disinfecting Antimicrobial Activity Test Result > 99.9%
tested certified & compliant:
ISO22196:2011
REACH SVHC 209
US FDA 177.1520
- Made from zCover HealthCare Grade Self-disinfection Antimicrobial silicone
- Provide 24 / 7 / 365 infection control protection
- Protect your handset from COVID-19 infection and cross-contamination
- Easily replace cover between shifts
Suggestion:
For better infection control, sanitize as necessary. |
|
- Features:
- US FDA REACH SVHC tested certified & compliant:
ISO22196:2011
REACH SVHC 209
US FDA 177.1520
- Integrated deCoVID nanoparticles that block microbial
growth and are released 24 / 7 / 365
- Self-disinfection Antimicrobial Activity Test Result > 99.9%
- Safe to clean with alcohol and germicidal wipes
- Block COVID-19 infection and cross-contamination
- NO PVC
- NO Latex
- NO toxicity
- NO heavy metal
|
- Designed for Ascom d63/i63, Avaya 3735 & Mitel 5634 Handset (Compatible with IR Feature)
- Crafted from Self-disinfecting Antimicrobial, non-toxic, latex-free, HealthCare grade silicone rubber, gloveOne® cases are super-strong and keep phones safe from dirt, scratches, liquids and impact.
- All control buttons are protected while still being totally accessible.
- The case is molded to protect the controls with an ultra-thin, skin-touch silicone layer, making the buttons even more comfortable to use.
- Easily change the battery with Back Open design of the gloveOne®Self-disinfecting Antimicrobial Silicone Case.
|
|
- Printed keypad allows you to see the characters more clearly while the phone is being protected
- New zCover Self-disinfecting Antimicrobial Silicone printing technique makes the printed characters more clear and last much longer
- Crafted from Self-disinfecting Antimicrobial non-toxic, latex-free, HealthCare grade silicone rubber, cases are super strong and phones are kept safe from dirt, scratches, liquid and impact
|
- zCover Dock-in-Case® Antimicrobial HealthCare Grade Silicone Case ONLY fits Ascom d63/i63, Avaya 3735 & Mitel 5634 Handset (Compatible with IR Feature), Solid Color with Printed Keypad, 5 colors avaliable for your choice.
|
- zCover Self-disinfecting Antimicrobial Silicone rubber is an excellent healthcare grade material for keeping handsets protected in all kinds of environments. It withstands heat, cold, and UV. It is non-toxic, does not react with most chemicals or support microbial growth. It retains its original shape even when stretched to its limit. It is tear and puncture resistant and very durable. Because it is safe to wash or clean with germicidal wipes, it is recommended for shared phones, especially in healthcare settings. Learn more about HealthCare grade silicone.
- Safety tested with Caviwipes, PDI Sani-Cloth AF3, PDI Super Sani-Cloth, PDI Sani-Cloth Bleach & PDI Sani-Cloth Plus
|
|
